Worth Data 5000 TriCoder s Manuel du propriétaire télécharger pdf (Page 54)

How To Use Local Test Server

When you start the Test Server, you will first see a notice about how you must configure your Terminal(s) in

order to work with the Local Test Server.

Notice that your Terminal

must be set to find the Local

Test Server on your LAN.

This requires finding the IP

address of your computer on

your LAN.

Do this by opening a DOS

(Command) window and

entering the command:

IPCONFIG

You will see a list of

connection information for

your computer. Find the one

marked “Local Area

Connection” or “Wireless

LAN Connection” or similar

that gives you information

on:

IPv4 Address.......: xx.xx.xx.xx

Subnet Mask........: xx.xx.xx.xx

Default Gateway....: xx.xx.xx.xx

The “Ipv4 Address” is what you need for configuring your Terminal to connect with the Local Connection

Host running on your computer.

Also, if you are intending to use a Local Connection Host running on a computer on your LAN, you will

want that computer to have a static IP address and not use a DHCP server. If you are not familiar with static

IP address and DHCP servers, consult your network administrator for more help.

Once you click OK on the notice, the local LAN-based Connection Host program automatically start and

then the actual Test Server will load.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 135 136

Pas de commentaire

Worth Data 5000 TriCoder s Manuel du propriétaire Page 54