Worth Data RF Terminal 7000 Spécifications télécharger pdf (Page 85)

Relay Station RS422 Pin-outs

The RF Relay Stations are connected by twisted pair wire -- use Belden 1227A1, Cat 5 wire or equivalent.

The Relay Port on the Base Station and the Relay Port on the Relay Station are connected with a straight

cable using the following pin-outs:

Base Connector Pin # Relay Connector

Receive Data + 5 Transmit Data +

Receive Data - 6 Transmit Data -

Transmit Data + 2 Receive Data +

Transmit Data - 3 Receive Data -

Make a cable with 5-5, 6-6, 2-2, and 3-3 (a straight cable); but, be careful that you select wires so that the 2

wire is in the twisted pair with the 3 wire, and the 5 wire is in the twisted pair with the 6 wire.

For all RJ Cable pin numbers, number from left to right with the metal pin side of the connector facing you

and the cable running to the down position.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 102 103

Pas de commentaire

Worth Data RF Terminal 7000 Spécifications Page 85